速盈平台注册

VCR接头安装后检查的详细解答-江门艾瑞精密机械经验分享

来源：本站 时间：2019-03-16 13:56:16 浏览次数： 548 速盈平台注册

VCR接头速盈平台注册如果没有拧到位，就有可能产生泄漏，即便有可能当时不漏，但会成为运行后的隐患。因此小编有请教一些施工经验比较丰富的专门做高纯气体管道的工程师，他们说最好拧1/4 圈，这样比较保险，否则容易有泄漏隐患。因此建议施工时还是拧 1/4 圈。现场管理人员可以通过如下两种方法进行检查：

　　If the RVCR joint is not screwed in place, there may be leakage, even if it may not leak at that time, but it will become a hidden danger after operation. Therefore, small make up have to consult some of the construction experience more rich specifically to do high purity gas pipeline engineers, they said that it is best to twist a quarter of the ring, so more insurance, or easy to have a hidden danger of leakage. Therefore, it is recommended to screw 1/4 turn during construction. Field managers can conduct inspections in the following two ways:

　　（1）检查VCR接头速盈平台注册上的标记，看是否拧了1/4圈；

　　（2）通过内螺纹螺母上的泄漏测试孔（Test Port）进行测试。

速盈平台注册　　方法（1）简单易行，随时可以检查。但前提是工人施工时必须做好标记，否则没法检查。方法（2）虽然很可靠，但需要专门的仪器和设备，而且要更多的人力、物力，因此要根据项目的具体情况决定是否采用，通过内螺纹螺母上的泄漏测试孔还可以检查是否安装了垫片。

速盈平台注册　　(1) check the mark on the VCR joint to see if 1/4 turn is screwed;

　　(2) Test through the Test Port on the inner thread nut.

速盈平台注册　　Method (1) is simple and can be checked at any time. But the premise is that the workers must do a good job of marking construction, or can not be checked. Method (2) although very reliable, but requires special instruments and equipment, but also more manpower, material resources, so according to the specific circumstances of the project to decide whether to use, through the internal thread nut leakage test hole can also check whether the installation of gaskets.

文章出自江门艾瑞 转载请标明出处

VCR接头订购联系：秦先生 17688183787